Philips 20FT3010 User manual - Page 14
LCD panel menu access, LCD Main Menu, LCD Hotel Mode Menu, hiFace Menu
View all Philips 20FT3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DFU 20FT3010/37 050404.0944 PRELIMINARY LCD Panel Menu Access There are three levels of menus that provide access to setup and control of the 20FT3010/37. 1. LCD Main Menu: The lowest menu level is the LCD main menu, which contains the menu items: picture & sound settings, and tuner mode. This menu is normally not accessible and must be reached by the instructions below. Philips iTV recommends that the factory-setup picture and sound settings be kept. Also note that the current volume level is used as the MAX volume when the "hotel mode" is activated. 2. LCD Hotel Mode Menu: The next menu level is the LCD hotel mode menu, which contains the following additional menu items: ON CHANNEL, CHANNEL BLANK, KEYBOARD LOCK, OSD display, and ON VOLUME. Of these settings, only ON VOLUME is usable, since the highest level or hiFace module software will override hotel mode menu items. This menu is normally not accessible and must be reached by the instructions below. ITV recommends that ON VOLUME is the only menu item set. The units are set at ON VOLUME level "50", as set at the factory. 3. hiFace Menu: The highest menu level is the hiFace module menu, which contains most of the standard iTV features: CHANNEL RING, AUTO-PROGRAMMING, KEYBOARD LOCK, ESP, WELCOME MESSAGE, CHANNEL GUIDE, REMINDER, SECURITY, etc. The menu items missing are the volume controls (MAX / ON). These are available in the menu levels previously discussed, but cannot be cloned. Only the menu items at this highest level can be cloned. The additional menu setting is HIFACE CONTROL. This item must be ON for the hiFace module to control the panel and activate the SmartPort. The only time that this menu item should be set to OFF, is when one accesses the service mode or accessing the other two levels. 1. With iTV setup remote (in setup mode), press MENU button. 2. Cursor down through setup menu, set IFACE CONTROL OFF (IFACE 1.01) or AV LOCK ON (HCIFACE 0.07).Then EXIT menu. TV SETUP MENU CHANNEL DISPLAY KEYBOARD LOCK ESP WELCOME MESSAGE CHANNEL GUIDE REMINDER 3 DIGIT ENTRY A/CH A/V SWITCH IFACE CONTROL ALL OFF OFF > OFF OFF OFF OFF OFF IFACE 1.01 TV SETUP MENU LANGUAGE ENGLISH CHANNEL INSTALL > CURRENT RING 1 SWITCH ON CHANNEL STANDARD POWER ON STANDARD ESP OFF CHANNEL GUIDE ON 3 DIGIT ENTRY OFF AV LOCK ON HCIFACE 0.07 3. After the hiface control menu item is OFF, the IR switch should be set to the "out" position (see below) to prevent the IR from reaching the hiFace module. This allows easy access to the other menu levels. Please note that this switch must be set to the "in" position when the hiFace module is active. ENABLE IR ON LCD PANEL BY PUSHING SWITCH OUT WITH 30mm-LONG PAPER CLIP OR RIGID WIRE. 14