Philips 20FT3010 User manual - Page 8

DFU 20FT3010/37 050404.0944 PRELIMINARY Philips ITV General Information Philips Institutional TV Software Typical Philips Institutional Televisions can be configured to operate in either "Consumer" or "Commercial" operational modes. However, the 20FT3010/37 hiFace-based ITV product is primarily intended to operate in the Commercial mode. Consumer-mode operation is not intended for the 20FT3010/37, because it is based on a consumer product (20PF7835) that is adapted for commercial use by means of the hiFace module. Commercial Mode The configuration of Commercial mode features requires a Philips ITV master setup remote (RG4172BK or RC2573GR, optional accessory). When the television is in Commercial mode, access to its operation from its keyboard or from a guest-mode remote can be restricted, depending upon the settings of the Institutional TV features. For examples, the unit's keyboard controls can be "locked-out" (rendered inoperable), only certain channels can be selected, and the volume can be limited to a given range. RG4172BK RC2573GR Philips ITV master setup remotes Identifying the Operational Mode: To identify the television's operational mode, a system 7 (commercial setup mode) master setup remote must be used. With the setup remote in setup mode (RG4172BK: press TV SETUP, or RC2573: place switch in SETUP position), press Recall. The following information will appear on-screen, depending upon the version of iFace / HcIface. NOTE: There are currently two versions of the 20FT3010/37. The respective versions are as indicated in the last line of the respective SYSTEM STATUS. SYSTEM STATUS MODE CHANNEL DCM CODES SIGNAL OP HRS IFACE COMMERCIAL TV 12 (ANTENNA) OFF 96 1 98 48 8 0 200 32 32 34 TUNED 000Bh 1.01 MODE CHANNEL DCM CODES OP HRS HCIFACE COMMERCIAL AV2 (AV2) OFF 44 0 34 48 8 0 200 32 32 32 000Bh 0.07 / 1.00 IFACE 1.01 HCIFACE 0.07 / 1.00 8