Philips 30PF9946D/37 User manual - Page 13

2355.4 en 02-11-2004 14:19 Pagina 9 HDMI (High Definition Multimedia Interface) connector AV3 L AUDIO HDMI R HDMI is the leading new standard for Digital High Definition video and audio interconnection. Eg. with a Digital Set top box, with HDMI-equipped devices like a DVD-R, AV receiver... Note: The HDMI connector does NOT support DVI devices with analogue audio. The HDMI connector allows - the following TV and monitor display modes: EDTV 640/720 x 480p 720 x 576p HDTV 1920 x1080i VGA 640 x 480 60 Hz SVGA 800 x 600 60 Hz XGA 1024 x 768 60 Hz - uncompressed HD content - encrypted or non encrypted signals. Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the HDMI connector of your TV. Notes: - Proper working is only guaranteed with HDMI compliant consumer products. - Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display; - If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong with the set. To select connected devices AV+ 7 8 9 AV+ 0 - ACTIVE SLEEP SAP CONTROL TIMER PIP AUTO AUTO M a According to where you connected the accessory devices, press • AV+ followed by digit '1' to select AV1 • AV+ followed by digit '2' to select AV2 • AV+ followed by digit '3' to select REAR for a device connected to the rear or to the side (according to the type of TV you've purchased), see p. 6 • AV+ followed by digit '4' to select HD-A for a HD-A device connected to AV3, see p. 8 • AV+ followed by digit '4' again to select HD-D for a HD-D device connected to AV3, see p. 9 • AV+ followed by digit '5' to select PC-A for a PC connected to AV3, see p. 8 • AV+ followed bij digit '1' and followed by P+ to select CVI. Note: When in HD or PC mode, first press the TV button to return to TV mode or to select AV1, AV2 or REAR again. 9