Philips 30PF9946D/37 User manual - Page 8

2355.4 en 02-11-2004 14:19 Pagina 4 Use of the remote control RC4334 Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it. Remark: in VGA mode only some buttons are valid. VCR DVD TV SAT AMP Press the SELECT button repeatedly to select one of the system modes in which the remote control can be used. If no action is being undertaken within 2 seconds, the remote control returns to TV mode. After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode. INFO Display information To display the channel number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Press again to display the ratings selected.The volume level and the smart control adjustments are then displayed each time they are used. Audio and Video equipment buttons. TV / PC Press one of these buttons to switch the television between TV or PC mode. SURR Sound mode Incredible surround With stereo transmission, and when Incredible surround is selected, it seems as though the loudspeakers are spread further apart from one another. Virtual Dolby Surround Optimal with Dolby surround * signals. Enables you to experience the effect of Dolby Surround Pro Logic, reproducing a rear sound effect. See Sound menu, Dolby Virtual p. 2. Note:You can make the same selection in the Sound menu, Dolby Virtual, p. 2. HD Press this button to use the remote control directly in the HD mode for HD devices (eg. Set Top box). Press 1x for HD-A mode, press 2x for HD-D mode. POWER B VCR DVD TV SAT AMP ® INFO Ò TV SELECT ‡ π PC SURR º † HD SURF FORMAT ® ® OK ® ® MENU CC + + V ¬ P - - 1 2 3 4 5 6 7 8 9 AV+ 0 - ACTIVE SLEEP SAP CONTROL TIMER PIP AUTO AUTO M a * Manufactured under license from Dolby Laboratories. 'Dolby' 'Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories. POWER B Press to turn the TV on or off. The TV is never powered off completely unless it is physically unplugged. OK Press this button to display the program list or to activate your choice or to confirm when in the menus. MENU Main menu on/off. See p. 2. CC Closed Caption On/Off/On during mute V To adjust the volume. ¬ Interrupt the sound or restore it. P Channel selection To browse through the TV channels or sources stored. 0/9 Digit buttons To select a TV channel. For a two digit program number, enter the second digit before the dash disappears.To switch immediately to a selected one digit TV channel, keep the digit button pressed a bit longer. AV+ To select connected devices, see p. 9. - To type the digital seperator for digital channels. SLEEP TIMER To select the length of time before the set automatically turns off (from 15 to 240 minutes). PIP When in VGA or HDMI Mode, pressing the PIP button will bring up a smaller second window within your main screen enabling you to watch a TV channel and a picture from a device connected to AV3, at the same time. 4