Philips 30PF9946D/37 User manual - Page 18

2355.4 en 02-11-2004 14:19 Pagina 14 Using in PC monitor mode Your TV can be used as a computer monitor. You must first of all connect the computer and adjust the resolution (see p. 8). Choosing PC mode Press the PC button on the remote control to switch the TV to PC mode. Press the TV button to return to TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby mode. Using the PC menus TV Menu Picture TV Sound PC Features HD Install Mode π PC mode Picture π Audio selection Features Reset to Factory Mode Brightness Picture Horizontal Vertical Color Temp. Features Phase Clock Format PIP Auto Adjust Press the MENU button to access the specific settings of the PC monitor mode. Use the cursor buttons to adjust them (the settings are automatically saved). Picture • Brightness/Picture: to adjust the brightness and contrast. • Horizontal/Vertical: to adjust the horizontal and vertical placing of the image. • Color Temperature: to adjust the colors (cool, normal or warm). Audio selection To choose the sound reproduced on the TV (PC/HD or TV). Note: - You must choose TV mode before going to TV/HD mode. - To listen to the sound from a HD device in PC mode, take care you also connected the audio cables to the HD device. Features • Phase/Clock: eliminates the horizontal (Phase) and vertical (Clock) interfering lines. • Format: to choose between large screen (Fullscreen) or the original (Native) format of the PC screens. • PIP: change the Size and Position of the PIP window on the screen when the PIP button is used. • Auto adjust: Position is set automatically. Reset to Factory To return to the factory settings Mode To come back to TV mode. 14