Philips 30PW850H User manual - Page 51

REMOTE CONTROL VCR SPECIFIC BUTTONS When using the TV remote control with a VCR, first make certain it is set to control your VCR (by the REMOTE CODE or SEARCH method). 1 Set the TV/VCR/ACC mode switch to VCR on the remote control. 2 Point the top of the remote toward the front of the VCR (remote sensor window) when pressing the buttons. 2 1 VCR System Switch Set in the VCR position to send remote commands to the VCR. Record Button Hold the REC(ord)/Sap and PLAY ᮣ buttons down to begin a VCR recording. Play Button ᮣ Press to begin playback of a videotape. Rewind Button ᮤᮤ Press to rewind tapes. For some VCR's, the STOP button may have to be pressed first, then REWIND. In playback mode, hold down the button to view the picture moving rapidly in reverse. Stop Button ■ Press to stop the motion of a tape in playback, rewind, fast forward, and so on. HELPFUL HINT Remember, the VCR buttons on the remote will not operate your VCR if those features are not found on your VCR remote control. NOTE: All VCR functions (particularly Search, Rewind, Fast Forward, etc.) will operate the same as with the original VCR remote control provided with the VCR. Power Button Press to turn the VCR ON and OFF. TV/VCR Button Press while in the VCR mode (the VCR indicator on the front of the unit will light) to view the playback of a tape. Press again to place in the TV position (the VCR indicator light will go off) to view one program while recording another program. Number Buttons Press buttons for the direct selection of VCR channels. Channel + and - Buttons Press to scan up or down through the VCR channel numbers. Fast Forward Button ᮣᮣ Press to rapidly advance the tape. For some VCRs, you may need to press the STOP button first, then the FAST FORWARD button. In playback mode, hold the button down to view the picture moving rapidly in the forward direction. Pause Button II Press to temporarily stop the tape during a playback or recording. Press again to release Pause. 51