Philips 32PF9966 User manual - Page 32

TBeipfos re Calling Service Symptoms Items to Check and Actions to follow "Ghost" or double images • This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. No power • Check that the TV's AC power cord is plugged into the mains socket. • Unplug the television, wait for 60 seconds. The re-insert plug into the mains socket and turn on the television again. No picture • Check antenna connections at the bottom of the TV to see if it properly connected to the TV. • Possible broadcast station trouble.Try another channel. • Adjust the contrast and brightness settings.Try another auto picture setting. • Check the Closed Captions control. Some TEXT modes could block the screen. • Switch your HDMI-source to a correct display mode. No picture and • Your TV has a protective mode in case there is too much heat build-up. power switched on Check the clearance around the vents of the device to be certain there are no blocking walls or cabinets which would limit the air flow. No sound • Increase the VOLUME. • Check that the TV is not muted, press the MUTE button on the remote control. • When no signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate a malfunction. Good sound but poor color or no picture • Adjust the contrast, color, tint and brightness setting. Try another auto picture setting. Poor picture • Check the HDMI connection. Snowish picture and noise Television not responding to remote control • Check the antenna connection. • Check whether the batteries are working. Replace if necessary. • Clean the remote control sensor lens on the monitor. • Operating range between TV and the remote control should not be > 240". • You can still use the buttons on top or the right side of your TV. • Check if the remote control is in the correct mode. Control of accessory devices • The infrared signals of the screen may influence the reception sensibility of other peripherals. Solution: replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from within a radius of 50". No stable or not Check if you have selected the correct VGA mode in your PC. synchronized VGA picture Standby Miscellaneous Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution. Power consumption: 2 W. See Extras, Specifications on this CD. 28