Philips 40PFL7705D User manual - Page 33

Network update You can update the software by connecting the unit to the Internet. 1 Follow steps 1 to 2 in 'Connection Test' on page 26. 2 Press MENU on the remote control and then use to select [Setup] > [Software Update] > [Updates] > [Network]. 3 Use Í / Æ to select [Yes], then press OK. • This unit will then start checking for the latest firmware version. 4 Confirmation message will appear. Use Í / Æ to select [Yes], then press OK. • The unit will start downloading the latest firmware version. • The unit will start updating the firmware version. • It may take a while to complete the updating. 5 When the software update is complete, press POWER . at the side of the TV to switch off the TV. 6 Switch on the TV. » The TV starts up with the new software. Note • In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary settings. • For the network connection, refer to 'Connecting the TV to the internet using an Ethernet cable' on page 36. • For the network setup, refer to 'Network' on page 26. • Please do not unplug the AC power cord or LAN cable while executing the 'Network update'. • All settings will remain the same even if you update the software version. • The version of Netflix will also be updated if newer version of Netflix is available when updating the firmware. 32 EN