Philips 40PFL7705D User manual - Page 37

Connecting a set-top box via a composite connector and analog audio Connecting a digital home theater amplifier using a digital audio coaxial cable IN AUDIO L/R + VIDEO OUT RF IN Set-top box CABLE Note • Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers. • When you connect cables, match the cable colors to the connectors on the TV. Connecting the TV to the internet using an Ethernet cable OUT DIGITAL AUDIO IN digital home theater amplifier Note • Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast. LAN cable LAN WAN 1 2 3 4 5 Hub or broadband router Internet LAN LAN cable Telecommunications equipment (modem, etc.) Note • Please purchase shielded LAN cables at your local store and use them when you connect to network equipment. • After connecting a LAN cable, set up necessary network settings.(For the network setup, refer to 'Network' on page 26) • Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit. • If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router. • If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub. • For a broadband router, use a router which supports 10BASE-T / 100BASE-TX. • Do not connect your PC directly to the LAN terminal of this unit. 36 EN