Philips AC1213 User manual - Page 11

English Setting up the Wi-Fi connection for the first time Note •• This function is for AC1214 only. •• This instruction is only valid when the air purifier is being set up for the first time. If the network has changed or the setup needs to be performed again, consult section "Setting up the Wi-Fi connection when the network has changed" on page 10. •• You cannot set up two air purifiers at the same time. If you want to set up more than one air purifier, you can only do it successively. •• Make sure that the distance between your mobile device and the air purifier is less than 33 ft/10 m without any obstructions. 1 Put the plug of the air purifier in the wall outlet and touch to turn on the air purifier. »» The Wi-Fi indicator is not displayed on the screen when using the air purifier for the first time. 2 Download and install the 'Air Matters' App developed by FreshIdeas Studio or Philips 'HealthSuite health' App from the App Store or Google Play. 3 Touch and simultaneously for 3 seconds until you hear a beep. »» The air purifier goes to pairing mode. »» The Wi-Fi indicator blinks orange. 4 Make sure that your mobile device is successfully connected to your Wi-Fi network. 5 Launch the 'Air Matters' or Philips 'HealthSuite health' App and follow the onscreen instructions to connect the air purifier to your network. 6 After the successful pairing and connection, the Wi-Fi indicator will light up white. If pairing is not successful, consult the troubleshooting section, or the help section in the 'Air Matters' or Philips 'HealthSuite health' App for extensive and up-to-date troubleshooting tips. EN 9