Philips AC2885 User manual - Page 11
Getting started
View all Philips AC2885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English 3 Getting started Installing the filters Note •• Make sure the air purifier is unplugged from the electrical outlet before installing the filters. •• Make sure the side of the filter with the tag is pointing towards you. 1 Pull the bottom part of the front panel to remove it from the air purifier (fig.c). 2 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.d). 3 Remove all filters (fig.e). 4 Remove all packaging materials from the filters (fig.f). 5 Place the thick HEPA filter (FY2422) into the air purifier and then the thin AC (activated carbon) filter (FY2420) (fig.g). The model numbers are shown on each filter. 6 Attach the pre-filter back into the air purifier (fig.h). Note •• Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier. 7 Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.i). 8 Wash your hands thoroughly after installing filters. EN 9