Philips AZ4000 User manual - Page 11

English Adjusting the sound Adjusting the Sound Volume ULTRABASS CD B REPEAT MUTE 3 VOLUME 4 SHUFFLE BASS ULTRABASS Turn the SOUND CONTROL CENTRE/ VOLUME control clockwise to increase or anti-clockwise to decrease volume on the set (or press VOLUME 3 or 4 on the remote control). ➜ Display shows the volume level indication, and a number from 0-32. Bass & treble frequencies ULTRABASS To adjust the bass and treble frequency levels, on the set press the BASS/ TREBLE button once or more until the desired option is displayed.While the BASS/ TREBLE option is shown, turn the SOUND CONTROL CENTRE/ VOLUME control to increase or decrease (-5 to + 5 steps maximum) the desired tone. This is another bass sound option. Press ULTRABASS once or more to select Ultrabass on or off ( ). ➜ When activated, the ULTRABASS indicator lights up and the display shows . Notes:To prevent sound interference the bass control options operate exclusively.You cannot combine the bass from BASS/TREBLE with ULTRABASS. - The display shows or to remind you if you attempt to use both bass settings. You can also press BASS on the remote control to select Ultrabass on/off. Mute • Press MUTE on the remote control to interrupt sound reproduction instantly. ➜ Playback continues without sound and display shows blinking when activated. • To reactivate sound reproduction or cancel MUTE you can: - press MUTE again; - adjust the volume controls; - change source; - switch the set off. 11