Philips BTM2180 User manual - Page 14

6 Other features Set the alarm timer This unit can be used as an alarm clock.You can select CD, FM, or USB as alarm source. Note •• Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/ TIMER for more than two seconds. »» The hour digits are displayed and begin to blink. 2 Press / repeatedly to set hour. 3 Press SLEEP/TIMER to confirm. »» The minute digits are displayed and begin to blink. 4 Repeat steps 2-3 to set minute, select a source (CD, FM, or USB), and adjust volume. Note •• If no button is pressed in 90 seconds, the system exits timer setting mode automatically. To activate or deactivate the alarm timer: Press SLEEP/TIMER repeatedly to activate or deactivate the alarm. »» If timer is activated, is displayed. Tip •• If CD/USB source is selected, but no disc is placed or no USB connected, the system switches to the tuner source automatically. Set the sleep timer To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed. Otherwise, disappears. Listen to an external device You can listen to an external device through this unit with an MP3 link cable. 1 Press USB/AUDIO IN repeatedly to select AUDIO IN source. 2 Connect an MP3 link cable (not supplied) between: • AUDIO IN jack (3.5 mm) on the unit, • and the headphone jack on an external device. 3 Start to play the device (see the device user manual). FM CD AUDIO IN PRESET/ALBUM AUDIO IN REPEAT VOL SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER SLEEP SOURCE VOLUME AUDIO IN AUDIO IN EN 14