Philips CD6451B User manual - Page 40

Caller Line Identification CLI service

Page 40 highlights

Caller does not hear me! • Microphone may be muted: During a call, press > to unmuted the microphone. Noise interference on your radio or television. • Move the power adapter or base station as far away as possible Product behavior Caller Line Identification (CLI) service does not work. • Check your subscription with your network operator A phonebook entry cannot be stored. • Check if the phonebook memory is full, delete an entry to free memory. The handset is unable to register. • Make sure that p has been pressed for 3 seconds • Each base can only register up to four handsets Answering Machine The answering machine does not record calls. • Make sure the answering machine is connected to the power adaptor, and the power adaptor is plugged into mains supply which is switched on. • Check if the answer machine is off, or Answer only mode is selected. • Check to see if the answering machine is memory full. If so, delete some or all messages. • Try switching off the power at the main socket, and then turn it on again after 1 minute. Unable to perform remote operation. • Make sure the remote access is on (see Section 6.6.4.2) • Make sure you entered the correct remote access code • Use a touch-tone phone Note If the above solutions do not help, remove the power from both the handset and the base. Wait for 1 minute and try again. 38 Frequently asked questions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

38
Frequently asked questions
Caller does not hear me!
Microphone may be muted: During a call, press
>
to unmuted the microphone.
Noise interference on your radio or
television.
Move the power adapter or base station as far
away as possible
Product behavior
Caller Line Identification (CLI) service
does not work.
Check your subscription with your network
operator
A phonebook entry cannot be stored.
Check if the phonebook memory is full, delete
an entry to free memory.
The handset is unable to register.
Make sure that
p
has been pressed for 3
seconds
Each base can only register up to four handsets
Answering Machine
The answering machine does not record
calls.
Make sure the answering machine is
connected to the power adaptor, and the
power adaptor is plugged into mains supply
which is switched on.
Check if the answer machine is off, or Answer
only mode is selected.
Check to see if the answering machine is
memory full. If so, delete some or all messages.
Try switching off the power at the main socket,
and then turn it on again after 1 minute.
Unable to perform remote operation.
Make sure the remote access is on (see Section
6.6.4.2)
Make sure you entered the correct remote
access code
Use a touch-tone phone
Note
If the above solutions do not help, remove the
power from both the handset and the base. Wait
for 1 minute and try again.