Philips DECT2251G User manual - Page 33

Remote access You can access your answering machine when you are away by using a phone set on tone dial mode (see Section 8, Dial mode, page 19). Note: You have to enter the Security PIN to access the answering machine. To remotely access the answering machine, 1. Place a call from an external line to your answering machine. 2. When the answering machine answers the call and starts playing the OGM, press the STAR key. Note: If the answering machine is originally off, the answering machine will emit one beep after 10 rings. Then proceed to step 3. 3. Enter the Security PIN. The PIN entered is correct The remote access is activated once the correct PIN is entered. The PIN entered is incorrect You have three attempts to enter the correct PIN or the connection will be lost. 4. Press a button anytime to carry out the desired function. Press a key (see table below) anytime to carry out the desired function. Note: If you are lost during remote access, press the 5 key once to stop the current operation and start again. Note: The connection will be lost if no key is pressed within 8 seconds from the last key pressed. The remote access function This is the remote access function Function To play messages To play OGM To record OGM To stop To stop or activate the answering machine To delete all old and new messages Remote Access Key twice While the message is being played, To play the previous message To repeat the current message To play the next message To stop the message play back To delete the current message 31 www.philips.com/faqs/dect twice DECT 225 Answering Machine 31 www.philips.com/faqs/dect