Philips DS3801W User manual - Page 23

English 6 Update firmware To improve the performance of DS3801W, of your DS3801W. Please register your product at www.philips. com/welcome for information about the latest Note www.philips.com/suppor t XXXX XXXX. zip 1 On your PC/Mac, go to www.philips.com/ suppor t. 2 3 Update from the Warning Always connect your DS3801W to AC power for Note To use an Internet browser other than Apple Safari on your PC/Mac, remember to go to the Wi-Fi router your DS3801W. See the user manual of your Wi-Fi connected to the Wi-Fi router. 1 Power on DS3801W (see 'Prepare' on page 12). » It takes about 35 seconds for the unit to boot up. During boot-up, the WI-FI SETUP indicator on the back of the unit blinks green quickly. » After boot-up, you can hear a beep and the WI-FI SETUP indicator turns to green steadily. DS3801W is network automatically. 2 Make sure that DS3801W and your PC/ Mac are connected to the same Wi-Fi router. 3 Open Apple Safari on your PC/Mac, then select 'Philips_Fidelio XXX' from the Bonjour pull-down list. Or open any other Internet browser on your PC/Mac, then type in the IP address of DS3801W (available on at the address bar. » web page is displayed. EN 23