Philips DVP2902 User manual - Page 11

DVD FUNCTIONS Please note : • Most instructions in this manual refer to remote control use. • This unit will automatically turn on the screen saver after 5 minutes of inactivity and into the standby mode after 25 minutes of inactivity. Playback Before: Turn on the TV, amplifier and any other device(s) which are connected to this unit. Make sure the TV and audio receiver (not included) are set to the correct channel/Input. Lights up when power is On. [DVD] [CD] ( [JPEG] )  on page 12 2 2 1 Press [ y ] to turn on this unit. 2 Press [ A ] and insert a disc 1 with label facing up. 3 Press [ B ] to start playback. 4 Press [ C ] to stop playback. 3 4 Disc menu [DVD] Some discs contain menus which allow you to customize DVD playback. Use [K / L / 0 / 1] to select an item, then press [OK], [ B ] (on the unit). Calling up a menu screen during playback [DVD] • Press [MENU] to call up the disc menu. • Press [TOP MENU] to call up the title menu. Note(s): • Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details. Resume playback [DVD] [CD] Press [ C ] during playback. PRE STOP icon will appear at the top-left on the TV screen. Press [ B ]. RESUME icon will appear at the top-left on the TV screen and playback will resume from the Point where playback was stopped. PRE STOP Note(s): • To cancel resume, press [ C ] one more time in the stop mode. • The resume playback information stays in unit memory even when the power is turned off, as long as the disc stays in the unit. Pause and step-by-step playback [DVD] [CD] [JPEG] Press [ F ] during playback. To continue playback, press [ B ]. [DVD] The disc goes forward by one frame each time [ F ] (on the remote control) is pressed in the pause mode. To continue playback, press [ B ]. 21 Note(s): • When you play back a DVD or CD-R/-RW with JPEG Files, refer to details on page 12. • " This operation is not available." may appear at the topleft on the TV screen when the operation is prohibited by the disc or this unit. • Some DVD may start playback from title 2 or 3 due to specific programs. • During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction. • You can change the on-screen language in "Menu" setting. (Refer to page 18.) Fast forward / Reverse search [DVD] [CD] Use [ g ] or [ h ] repeatedly during Playback to select the required forward or X2 reverse speed. To continue playback, press [ B ]. Note(s): • Fast forward or reverse search speed is different depending on the disc. Approximate speed is ×2, ×4, ×8 and ×20. Slow forward search [DVD] Press [ g ] repeatedly in the pause mode to select the required forward speed. To continue playback, press [ B ]. SF 1/2 Note(s): • Slow forward speed is different depending on the disc. Approximate speed is ×1/2, ×1/4 and ×1/8. Zoom [DVD] [JPEG] 1) Press [ZOOM] repeatedly during playback to select the required zoom factor: ×1.5, ×2 or ×2.5. ZOOM 2 2) Use [K / L / 0 / 1] to slide the zoomed picture across the TV Screen. 3) To exit the zoom function, press [ZOOM] repeatedly to select "ZOOM 1"(Off). Note(s): • Zooming function does not work while the disc menu is displayed. • Some part of the picture may not be zoomed depending on the disc or playback status. EN - 11 -