Philips DVP2902 User manual - Page 19

C Audio settings Choose the appropriate audio settings for your device. It only affects the sound during DVD playback. Follow steps 1 and 2 on page 16. 3 Select the desired item. 4 HDMI Audio: (Default: PCM) Set to "Bitstream" when the unit is connected to a Dolby Digital decoder. -Bitstream: outputs a Dolby Digital signals. -PCM: convert the Dolby Digital into PCM (2 channel). 5 To exit the menu System HDMI Audio 8 Night Mode Language Audio Video Preference 0 HDMI Audio Night Mode e Bitstream PCM Select the desired setting. Night Mode (Default: 0) Adjusts for clarity even when the volume is Low, by compressing the range of the lowest sound level and the highest sound level. HDMI Audio 8 Night Mode ge nce 0 Note(s): Audio Out: - Bitstream: Connecting to a Dolby Digital decoder for Dolby Digital audio output. The multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM. - PCM: Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital decoder. Convert the Dolby Digital into LPCM (2 channel). • This unit does not support DTS audio. This is not a malfunction. You need to set this unit to "Bitstream" in the "HDMI Audio" Menu and also need to connect to a TV or amplifier that supports DTS, then the audio will be output as DTS. It is only available when connected via a HDMI cable. • "HDMI Audio" cannot be configured when voice guide is set to on, as it is fixed to PCM. In order to configuring the setting, set voice guide to off. EN - 19 -