Philips DVP3980 User manual - Page 44
Troubleshooting
UPC - 609585171893
View all Philips DVP3980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
English Troubleshooting WARNING Under no circumstances should you try to repair this unit yourself, as this invalidate the warranty. Do not open this unit as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking this unit for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem No power. Solution - Press STANDBY-ON on the unit to turn on the power. - Ensure that the AC outlet have power. - Disconnect the power cord from the power outlet. Reconnect and try again after a few minutes. No picture. - Refer to your TVs manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. - If this happens when you turn on the progressive scan feature, wait for 15 seconds for the auto recovery or switch back to the default mode as below: 1) Press ç to open the disc tray. 2) Press and hold numeric keypad '1' on the remote control. - If this happens after you set the color system, wait for 15 seconds for the auto recovery or switch back to the default TV color system: 1) Press ç to open the disc tray. 2) Press and hold numeric keypad '3' on the remote control. Completely distorted picture or black/white picture. - Check the video connection. - Ensure that the disc is compatible with this unit. - Sometimes a small amount of picture distortion may appear. This is not a malfunction. - The disc is dirty. Clean the disc. No sound or distorted sound. - Check the audio connections to the connected audio device. - Make sure that the connected audio device is turned on to the correct input source. - Set the digital output setting correctly, based on the device you connected to this unit. See "Audio Setup Page - Digital Audio" for details. 44