Philips DVP5982 User manual - Page 40
HDMI Audio Setup - code
UPC - 609585129504
View all Philips DVP5982 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
English DVD Menu Options (continued) Digital Output Set the Digital Output according to your optional audio equipment connection. { All } Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2). { PCM Only } Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation). { Off } To deactivate the digital audio output. For example, if you use the AUDIO OUT jacks to connect to a TV or stereo system. HDMI Audio Setup This function allows you to set the digital audio to output via HDMI cable. A In 'Audio Setup Page', press S T to select { HDMI Audio Setup }, then press X. { On } To enable the HDMI digital audio to output via HDMI cable. { Off } To disable the HDMI digital audio to output via HDMI cable. B Use ST to select a setting and press OK to confirm. LPCM Output If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust 'LPCM Output'. { 48K } Playback a disc recorded at the sampling rate of 48kHz. { 96K } Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in Stereo-Classic (Flat) mode. Tip: - Discs are recorded at a certain sampling rate. The higher the sampling rate, the better sound quality. LPCM Output can be selected only when PCM Only is activated. TIPS: 40 The underlined option is the factory default setting. Press W to go back to previous menu item. Press SETUP to exit the menu item. 1_dvp5982MKII_37_eng 4.indd 40 2007-10-11 3:47:36 PM