Philips FW930 User manual - Page 23

English CD RECORDER Notes: - You can use Shuffle in combination with repeat all or programmed playback. - REPEAT will be cancelled if you open the disc tray. Programming • You can program up to 99 tracks to play in any desired sequence. • Tracks can be programmed more than once, but each time counts as a track (STEP). 1 In Stop mode, press PROG on the remote control to enter Program mode. ™ The PROGRAM flag starts flashing and "PROGRAM" appear on the display. 2 Select the required track numbers by turning EASY JOG left or right (or Digit 0-9 on the remote control) and store by pressing ENTER button . ™ The track will be stored in the program. ™ The track number, total program time and the number of programmed tracks (STEPS) appear on the display. 3 Repeat step 2 for all tracks to be programmed. 4 Press STOP Ç or PROG again on the remote control to end programming. 5 Press PLAYÉ to start programmed playback. Notes: - To review the program, press PROG on the remote control, followed by à or á with the CD recorder in Stop mode. - If you try to store more than 99 tracks, "PROG FULL" appears on the display. Clearing a program 1 Press STOP Ç if necessary to stop programmed playback. 2 Press STOP Ç again to clear the program. ™ The PROGRAM flag disappears from the display. • The program is also cleared if you open the disc tray. Erasing a track from a program 1 In Stop mode, press PROG on the remote control to enter Program mode. 2 Use à or á to select the track from which to delete. ™ The track number and program step appear on the display. 3 Press CANCEL to erase the track from the program. ™ The remaining program steps and the remaining playing time of the program will be displayed. Menu mode • In Menu mode you will have access to a number of features which are not available via the regular keys (on the deck's front and the remote control). • The TEXT submenus allow you to give names to discs and tracks. The disc and track names will be displayed during playback. • In the RECORDING submenus you can set Auto Track and Balance. • All settings (except Balance) made in Menu mode will be stored in the deck's memory and can be called up and changed at any time. General Operation 1 In Stop mode, select CDR. 2 Press STORE/MENU to enter Menu mode. ™ "TEXT EDIT" appears on the display. 3 Rotate EASY JOG to select the required submenus and press ENTER to confirm. 4 Rotate EASY JOG to select options in the submenus and press ENTER to confirm. 5 Press STORE/MENU to store settings and return to the submenu. 6 Press STOP Ç to store settings and exit Menu mode. Note: - Text can only be edited for unfinalized discs. (Finalized CDRW discs must be unfinalized first.) TEXT SETTINGS Storing names 1 Select the TEXT EDIT submenu. ™ "TEXT EDIT" appears on the display. 2 Press ENTER to confirm. 3 Rotate EASY JOG to select the required option in the submenu: CD ARTIST, CD TITLE,TRACK 1 ARTIST, TRACK 1 TITLE, etc. 4 Press ENTER to confirm. 5 Select the characters by rotating the EASY JOG button. • To insert a space between characters, press ENTER without selecting a character first. • To delete a character, press CANCEL. 6 Press ENTER to store the characters and move to the next cursor position. • To move to a required cursor position, press à or á. 7 Press STORE/MENU to store a name you have entered and return to the submenu or STOP Ç to exit. Notes: - A maximum of 60 characters can be stored per item. 23