Philips FW930 User manual - Page 33
CD Recorder
View all Philips FW930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
CD Recorder System does not react. • CD Recorder is in standby mode. ™ Press any key to activate the CD Recorder. • The system is not switched on. ™ Ensure that the ON/OFF button is on. • Main cable is not connected. ™ Ensure that the mains cable is plugged in correctly. • Player does not react. ™ Switch the ON/OFF button on the front of the player OFF and back ON. No sound. • The audio equipments are not connected or are connected wrongly. ™ Check the audio connections. ™ if using an amplifier, try using a different source. Amplifier sound is distorted. • CD Recorder analog output connection to amplifier is not correct. ™ Check that the CD recorder analog output is not connected to the amplifier Phono input Playback will not start. • The disc is not inserted properly. ™ Ensure that the label of the CD is facing up. • The disc is dirty or dusty. ™ Clean the disc. • The disc is defective. ™ Check that the disc is not defective by trying another disc. Cannot record. • The disc is dirty or dusty. ™ Clean the disc. • Check if CDR(W) is an finalized disc. ™ Unfinalized the disc. "WRONG DISC" is displayed. • The disc is not an AUDIO disc, ™ Replace the disc. "CHECK INPUT" is displayed. • Wrong input source chosen. ™ Reselect the correct source. "MEMORY FULL/FINALIZE CD" is displayed. • CDRW has to be unfinalized for recording. ™ Erase text or finalize disc to obtain memory space. Recording is distorted. • Recording level is not correct. ™ Make sure the recording level is correct. "DISC RECOVER" on display. • Power failure has occurred during recording ™ Wait for the CD recorder to repair the disc. TROUBLESHOOTING 33 English