Philips FW930 User manual - Page 28

English RECORDING Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press TAPE ( TAPE 1•2 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2. ™ Make sure the tape in tape deck 1 has its full spool to the left. 3 Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing. ™ "NORMAL" (normal speed) or "FAST" (high speed) will be displayed, followed by "DUBBING". ™ The HSD flag appears on the display during high speed dubbing. • Dubbing will start immediately. ™ The REC flag starts flashing. 4 Press Ç to stop dubbing. Notes: - At the end of side A, flip the tapes to side B and repeat the procedure. - Dubbing of tapes is only possible from tape deck 1 to tape deck 2. - To ensure good dubbing, use tapes of the same length. - During high speed dubbing in Tape mode, the sound is reduced to a low volume. - You can listen to another source while dubbing. 28 CD Synchro Start Recording 1 Load a blank tape into tape deck 2 and a disc into a disc tray. 2 Press CD to select CD mode. • You can program the tracks in the order you want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the order on the selected disc. 3 Press REC to start recording. ™ The REC flag starts flashing. • CD will start playback automatically. 4 Press Ç to stop recording. Digital Recording via Digital Out For CD digital recording, please refer to CD Recorder. One Touch Recording • For One Touch Recording, as soon as you press REC, the current source (CD, TUNER or AUX) will be recorded on tape deck 2 1 Load a blank tape in tape deck 2. 2 Press REC to start recording. ™ The REC flag starts flashing. 3 Press Ç to stop recording. Note: - When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.