Philips FWM3500 User manual - Page 23

Cannot display some files in USB device

Page 23 highlights

•• Reduce the distance between the remote control and the unit. •• Insert the batteries with their polarities (+/- signs) aligned as indicated. •• Replace the batteries. •• Aim the remote control directly at the sensor on the front of the main unit. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down. •• Wait until the moisture condensation at the lens has cleared. •• Replace or clean the disc. •• Use a finalized CD or correct format disc. Cannot display some files in USB device •• The number of folders or files in the USB device has exceeded a certain limit.This phenomenon is not a malfunction. •• The formats of these files are not suppor ted. USB device not supported •• The USB device is incompatible with the unit.Try another one. Poor radio reception •• Increase the distance between the unit and your TV or VCR. •• If the signal is too weak, adjust the antenna or connect an external antenna for better reception. Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer. Timer does not work •• Set the clock correctly. •• Switch on the timer. EN 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

21
EN
Reduce the distance between the remote
control and the unit.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the
sensor on the front of the main unit.
No disc detected
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
Use a finalized CD or correct format disc.
Cannot display some files in USB device
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
The formats of these files are not
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit and
your TV or VCR.
If the signal is too weak, adjust the antenna
or connect an external antenna for better
reception.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Timer does not work
Set the clock correctly.
Switch on the timer.