Philips FWP88P User manual - Page 28

English TIMER 5 Press CLOCK/TIMER to store the start time. ™ The timer is now set. ™ The TIMER remains on the display. • At the preset time, the timer will be activated. ™ The selected source will be played. Notes: - During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. - If the source selected is TUNER, the last tuned frequency will be switched on. - If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead. - If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. - The timer will not activate if a recording is in progress. To switch off the TIMER • Press TIMER ON/OFF on the remote control. ™ The timer is now switched off. ™ The display will show "CANCEL" and the TIMER disappears. To start the TIMER again (for the same preset time and source) • Press TIMER ON/OFF on the remote control. ™ The timer is now on. ™ The TIMER appears on the display. SLEEP TIMER Sleep (only on remote control) This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP on the remote control repeatedly to select a period of time. ™ The selections are as follows (time in minutes): 60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 ... ™ "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. ™ After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer • Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. 28 pg 01-31/P88/22-Eng 28 3/6/00, 1:28 PM 3139 116 19721