Philips FWR88 User manual - Page 21

English EXTERNAL RECORDING Manual recording Manual recording from an external source 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Repeatedly press DIGITAL / ANALOG AUX to select the input for the external source from which you want to record. yAUX Digital is displayed if the digital input is selected. yAUX Analog is displayed if the analog input is selected. 3 Press REC TYPE on the unit to enter the recording menu. 4 Rotate í JOG CONTROL ë to select the type of recording. yAUX Manual?: for manual start of recording 5 Press YES to confirm your selection. yWait is displayed. yRecord?, AUX and the remaining recording time of the CDR(W) are displayed. 6 Start playback on the external source in order to set the optimal recording level on the CD recorder (see "REC LEVEL key"). 7 Stop playback on the external source. 8 Go to the beginning of the desired track. 9 Press YES on the unit and simultaneously start playback on the external source. yThe CD recorder starts to record and RECORDING IN PROGRESS is shown. The remaining recording time of the CDR(W) is displayed. Note: If Check Input is flashing, check the digital connection. 10 Press Ç STOP on the unit to stop recording. yUpdate is displayed and RECORDING IN PROGRESS goes off. Manual microphone recording 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Set MIC LEVEL to the minimum level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone. 4 Repeatedly press DIGITAL / ANALOG AUX to select the input for the external source with which you wish to mix the microphone. yAUX Digital is displayed if the digital input is selected. yAUX Analog is displayed if the analog input is selected. 5 Press REC TYPE on the unit to enter the recording menu. 6 Rotate í JOG CONTROL ë to select the type of recording: yAUX Mix Mic: the microphone is mixed with the external source. yMic Only: only the microphone is recorded. 7 Press YES to confirm your selection. yWait is displayed. yRecord?, AUX and the remaining recording time of the CDR(W) are displayed. 8 Set the optimal recording level on the CD recorder (see "REC LEVEL key"). • In addition, you can also set the optimal recording level of the microphone by turning MIC LEVEL. 9 If AUX Mix Mic is selected: Press YES on the unit and simultaneously start playback on the external source. yThe CD recorder starts to record and RECORDING IN PROGRESS is shown. The remaining recording time of the CDR(W) is displayed. If Mic Only is selected: Press YES on the unit to start recording. yThe CD recorder starts to record and RECORDING IN PROGRESS is shown. The remaining recording time of the CDR(W) is displayed. 10 Press Ç STOP on the unit to stop recording. yUpdate is displayed and RECORDING IN PROGRESS goes off. DO NOT FORGET TO FINALIZE! Finalizing a CDR(W) disc is a simple procedure, necessary to: - play a recorded CDR on a standard CD player or - play a recorded CDRW on a CDRW compatible CD player and CD recorder. 3 Connect a microphone to MIC. 21