Philips HDP2510 User manual - Page 16

4 Connect to the playback device Notice If no input source is detected the following message appears: NO SIGNAL Connecting to devices with HDMI output Use a HDMI cable to connect the projector to a Blu-ray player, set top box or gaming console. Notice Use any of the HDMI sockets to connect the projector to a playback device when a 3D signal is broadcasted. 1 Connect the cable to one of the projector's HDMI sockets on the rear or side of the device. Connecting to a computer (VGA) Use a VGA cable to connect the projector to a computer, laptop or other devices. Notice Many laptops do not activate the external video output automatically when you connect a second display such as a projector. Check your laptop's user manual to find out how to activate the external video output. 1 Connect the VGA cable to the projector's VGA socket. 2 Connect the HDMI plug to the HDMI socket of the playback device. 3 In the Options menu, select HDMI 1,2 or 3 depending on which outlet is being used for the external device 2 Connect the VGA plug to the VGA socket of the computer. 3 Adjust the computer's resolution to the correct setting and switch the VGA signal to an external monitor. The following resolutions are supported: VGA SVGA XGA WXGA HD FULL HD Resolution 640 x 480 800 x 600 1024 x 768 1280 x 768 1280 x 720 1920 x 1080 Image refresh rate 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 16 Philips · HDP2510