Philips HTR5000 User manual - Page 18

English Getting Started CENTER DELAY - Select this to set the delay time in relation to the listening position/distance from the center speaker : 5ms, 3ms, 2ms, 1ms or OFF (default setting). REAR DELAY - Select this to set the delay time in relation to the listening position/distance from rear speakers : 15ms, 12ms, 9ms, 6ms, 3ms or OFF (default setting). Adjusting the speaker output levels You can adjust the rear speakers, center speaker and subwoofer output levels by comparing the sound from the front speakers. REPEAT REPEAT SLEEP DIM SUBW REAR CENTER TV VOL TEST TONE - Select this to turn 'ON' or 'OFF' (default setting) the test tone. If you have turned on the test tone, the test signal will be automatically generated to help you judge the sound level of each speaker and subwoofer. MENU OFF - Select this to exit from the system setup. 3 Press PROG to confirm your selection. 4 Use the VOLUME control to adjust the settings that best suit your surround sound needs. ➜ If the volume control is not used within 5 seconds, it will become normal volume control function. 5 Press PROG to confirm your selection. G Press the respective buttons on the remote (REAR +-, CENTER +and SUBW +-) to adjust the output level between -15dB ~ 10dB. Helpful Hint: - If you have selected Stereo or VSS mode, adjusting the center and rear speakers' volume level will have no effect. Helpful Hints: - Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. - If "CHECK SURROUND SETTINGS" appears on the display, press SURROUND button to select surround mode. - "AUTO PROG'" only available for selection in tuner mode only. 18 001-003_HTR5000_01_Eng2 15 1/2/32, 12:25 AM 8239 300 30571