Philips HTS3251B User manual - Page 44
Category, Menus / Options, Description, Advanced Setup, Mix Audio Output, Primary Audio Only, Speakers
UPC - 609585184664
View all Philips HTS3251B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Advanced Setup LIST OF SETTINGS Category Menus / Options Description Audio Night Mode Auto On Off Blu-ray Disc Audio Mix Audio Output Primary Audio Only Audio Output* Speakers • Refer to page 49 for HDMI Normal more information. HDMI LPCM Speaker Setup Surround Effects • This feature is • Sets the surround available only when effect of audio when "Audio Output" is set the setting of to "Speakers". surround mode is set (Refer to page 49.) to "Dolby Pro Logic II Movie" or "Dolby Pro Logic II Music". (Refer to "Selecting Surround Mode" on page 57.) Speaker Distance Center Width 0 ~ 7 Dimension -3 ~ 3 Panorama On Off Compresses range between soft and loud sounds. "Auto": Night Mode will be activated automatically when Dolby TrueHD audio is played back. "On": Activates the Night Mode. "Off": Deactivates the Night Mode. "Mix Audio Output": The audio for the secondary video and the interactive application will be output together with the audio for the primary video. "Primary Audio Only": Only audio for the primary video will be output. When playing back a BD-video which only contains primary audio, the audio output will be the same case as "Primary Audio Only" even if the "Blu-ray Disc Audio" is set to "Mix Audio Output". "Speakers" Audio will be output from the 5.1ch speakers. "HDMI Normal" The Multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM depending on the material. "HDMI LPCM" The Multi-channel or stereo audio signals are output from HDMI OUT jack with LPCM. default is 3 Adjust the sound balance between center and front speakers. default is 0 Adjust the sound balance between front and rear speakers. "On" : Sets the sound of center speaker to have surround-sound effect. "Off" : Sets the sound of center speaker to normal. Unit Front (L/R) Center Surround Default Feet Meters Sets the unit of measure for "Speaker Distance". Feet : default is 3 Sets the distance from the listening 0 ~ 15 default is 3 point to each speaker to get the Meters : default is 3 ideal delay time. 0 ~ 4.5 • If you change the setting of "Front (L/R)", the setting of "Center" and "Surround" will be set to the same setting automatically. • If you set "Front (L/R)" to 0 ft (0m), you can only select 0 ft (0m) for "Center" and "Surround". • Difference of the values among "Front (L/R)" and "Center" cannot exceed 5 ft (1.5m). Yes Sets all speaker distance settings to No the default setting. 44 EN