Philips HU4804 User manual - Page 9
Getting started - 40
View all Philips HU4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Controls overview(fig. b) G Power button Turn on or turn off the humidifier. H Timer button Set the timer for the humidifier (1H, 4H, and 8H). I Fan speed button Adjust the fan speed ( (low), and (normal)). J Humidity button Set the relative humidity level ( 40, 50 or 60). K Water level indication The indicator blinks when there is not enough water in the reservoir. 3 Getting started Prepare the humidifier 1 Place the humidifier on a flat, stable surface, about 4 inches (10cm) away from an inside wall. Make sure the surface is not sensitive to moisture. 2 Hold by both sides of the upper unit to lift it up (fig. c). 3 Remove the packaging material of the new humidification filter (fig d). 4 Assemble the new humidification filter around the filter support (fig e). 5 Put the filter and the filter support back into the water tank (fig f). 6 Fill the reservoir with approximately 67 fl. oz/2000ml cold tap water until water reaches the maximum water level indication (fig. g). 7 Place the upper unit back onto the reservoir (fig. h). Note • DO NOT overfill the reservoir. • Always empty the reservoir before refilling with clean, cold tap water. Rinse the reservoir, wipe clean and dry with a clean cloth or paper towel. For complete cleaning instructions, see section 'Clean your humidifier'. EN 7