Philips MANT901 User Manual - Page 6
Assembly
View all Philips MANT901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
EN Assembly Assembly of UHF Portion • Rotate reflector element rods into place. NOTE: When rotating element rods, grasp close to pivot and relieve spring pressure on pivot bracket detents. Don't apply excess pressure to reflector element rods. • Insert UHF Boom-A into UHF Boom-B and secure using 1-1/2˝ screw and lock washer. • Attach Reflector Arm Mounting Brackets to assembled UHF Boom (previous step) using two 1-1/2˝ screws and wing-nuts. Ensure that rotation arcs in Reflector Arm Mounting Brackets face toward UHF Boom elements. • Attach Corner Reflector Arms to Reflector Arm Mounting Brackets by sliding Reflector Arms between Mounting Brackets. Secure with 1-1/2˝ screw and wing-nuts. To fully secure Reflector Arms, snap into locking tabs and tighten screws. Assembly of VHF Portion • Rotate reflector element rods on VHF Boom-A and VHF Boom-B into place. NOTE: When rotating ele- ment rods, grasp close to pivot and relieve spring pressure on pivot bracket detents. Don't apply 6 excess pressure to reflector element rods.