Philips MC-I250 User manual - Page 40

English Troubleshooting RADIO RECEPTION Radio reception is poor. - If the signal is too weak, adjust the antenna or connect an external antenna for better reception. - Increase the distance between the Micro System and your TV or VCR. GENERAL The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality. The left and right sound outputs are reversed. The remote control does not function properly. The timer is not working. Not all buttons are lit. The Clock/Timer setting is erased. - Remove the AC power plug for one minute. Then reconnect and switch on the system again. - Adjust the volume. - Disconnect the headphones. - Check that the speakers are connected correctly. - Check if the stripped speaker wire is clamped into the speaker terminal. - Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 16 kHz, 22.05 kHz, 48 kHz, 44.1 kHz or 32 kHz. - Check the speaker connections and location. - Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë). - Reduce the distance between the remote control and the system. - Insert the batteries with their polarities (+/- signs) aligned as indicated. - Replace the batteries. - Point the remote control directly toward the IR sensor on the front of the system. - Set the clock correctly. - Press TIMER ON/OFF to switch on the timer. - Press DIM to select DIM OFF display mode. - Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. Visit our website "http://My.Philips.com" for online help. 38