Philips MCM108DB User manual - Page 15

CD/MP3/WMA Operation English MICRO SY STEM MCM108DB iR ➜ READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3/WMA disc) are shown. TRK POP PROG DBB MP3 CD REP ALL Basic playback controls To play a disc ● Press 2; to start playback. ➜ The current track number and elapsed playing time of the track are displayed during disc playback. To select a different track ● Press ¡1 2™ once or repeatedly until the desired track number appears in the display. IMPORTANT: The lens of the CD player should never be touched. To find a passage within a track 1 Press and hold down on ¡1 2™. ➜ The disc is played at high speed and low volume. 2 When you recognise the passage you want, release ¡1 2™. ➜ Normal playback continues. Loading a disc This CD player plays Audio Discs including CDRecordables, CD-Rewritables, MP3 CD and WMA CD. To interrupt playback ● Press 2; during playback. ➜ The display freezes and the elapsed playing time flashes when playback is interrupted. ➜ To resume, press 2; again. To stop playback ● Press 9. ● CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 Select CD source. 2 Press OPEN/CLOSE3 on the top of the system to open the CD compartment. ➜ OPEN is displayed when you open the CD compartment. 3 Insert a disc with the printe=d side facing up and press down on OPEN/CLOSE3 to close the CD door. Notes: CD play will also stop when; - the CD door is opened. - the disc has reached the end. - you select another source: TUNER. - you select standby Playing an MP3,WMA disc 1 Load an MP3/WMA disc. ➜ The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. ➜ "XXX YY" is displayed. XXX is the current track number and YY is the current album number. 2 Press ALBUM 4 3 to select a desired album.. 15