Philips MCM108DB User manual - Page 16

English CD/MP3/WMA Operation 3 Press ¡1 2™ to select a desired track. ➜ The album number will change accordingly as you reach the first track of an album by pressing ¡1 or the last track of an album by pressing 2™ . 4 Press 2; to start playback. ● During playback, press once ALBUM 4 3 to show the current album number. Supported MP3 disc formats: - ISO9660, Joliet, UDF 1.5 - Maximum title number: 512 (depending on filename length) - Maximum album number: 99 - Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz - Supported Bit-rates: 32~256 (kbps), variable bitrates Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback.The REPEAT modes can also be combined with PROGRAMME. SHUFFLE ......... tracks of the entire disc are played in random order REPEAT ALL ... repeats the entire disc/ programme REPEAT plays the current track continuously REPEAT ALB ... repeats all tracks in the current (for MP3/WMA only) album 1 To select your play mode, press the SHUFF or REPEAT on the remote control before or during playback until the display shows the desired function. 2 Press 2; (on the remote control 2;) to start playback if in the STOP position. ➜ If you have selected SHUFFLE, playback starts automatically. 3 To return to normal playback, press SHUFF or REPEAT on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed. ● You can also press 9 to cancel your play mode. Notes: - The SHUFFLE and REPEAT functions cannot be used simultaneously. - SHUFFLE play is not available in the programe mode. Programming track numbers Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory. 1 In the stop position, use the ¡1 2™ to select your desired track number. ● For MP3/WMA, you may press ALBUM 4 3 to select a desired album, then press ¡1 2™ to select your desired track. 2 Press PROGRAM (or PROG/CLOCK on the set) to store. ➜ Display: PROG flashes, and is displayed briefly, then the selected track number (and the selected album number for MP3/WMA). 3 Repeat steps 1-2 to select and store all desired tracks. ➜ FULL is displayed if you attempt to programme more than 40 tracks. 4 To start playback of your disc programme, press 2;. Reviewing the programme ● Stop playback and press PROGRAM (or PROG/CLOCK on the set) repeatedly. ➜ Display first shows a programme sequence, then the stored track number (and the album number for MP3/WMA). ● To exit review mode, pressÇ. Erasing the programme You can erase the programme by: ● pressing 9 once in the STOP mode; ● pressing 9 twice during playback; ● opening the CD compartment; ● Select another sound source. ➜ PROG disappears from the display. 16