Philips MCM108DB User manual - Page 18

English Clock/Timer MICR O SY STEM MCM108DB iR 4 Press ¡1 / 2™ to set the hours. 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press ¡1 / 2™ to set the minutes. 7 Press TIMER to confirm the time. ➜ The timer is now set and actiated. Notes: - If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically. - If source DOCK is selected and no iPod is docked or no dock connection is made,TUNER will be selected automatically. Setting the clock 1 In Standby mode, press PROG/CLOCK button. ➜ The clock digits for the hours flash. 2 Press ¡1 / 2™ to set the hours. 3 Press PROG/CLOCK again. ➜ The clock digits for the minutes flash. 4 Press ¡1 / 2™ to set the minutes. 5 Press PROG/CLOCK to confirm the time. Note: - If the clock has not been set will be displayed. Setting the timer ● The system can be used as an alarm clock. CD or TUNER or DOCK can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used. ● If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically. 1 In standby or during playback, press TIMER on the remote control for more than 2 seconds. 2 Press ¡1 / 2™ (or CD/TUNER/DOCK on the remote control) to select sound source. 3 Press TIMER to confirm your desired source. ➜ The clock digits for the hours flash. To activate and deactivate timer ● In standby or during playback, press TIMER once. ➜ Display shows if activated, and disappears if deactivated. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used. ● Press SLEEP on the remote control repeatly to select desired time before system shuts off. ➜ Display shows SLEEP and SLEEP TIMER series of time options for selection ● To deactivate, press SLEEP on the remote control once or more until " " is shown, or press STANDBY ON on the system or remote control. 18