Philips MCM760 User manual - Page 15
Connecting an additional, appliance
View all Philips MCM760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Installation 2 Fit the plug of the loop antenna to AM ANTENNA as shown below 3 Adjust the position of the antenna for optimal reception (as far away as possible from the TV, VCR or other radiation sources) AM ANTENNA Connecting an additional appliance Connecting a USB device or memory card On MCM760, you can playback music from a USB mass storage device and also record music to such a device. 1 Insert the USB device's USB plug into the socket on MCM760 iR FM antenna The wire antenna supplied can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna. 1 Extend the wire antenna and fit it to FM ANTENNA as shown below Note: If you are using a cable antenna system or an outdoor antenna, fit the antenna plug, instead of the wire antenna, to FM ANTENNA . 2 Move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources) 3 Fix the antenna's end to the wall CD PRESET PLAY / PAUSE TUNER USB TAPE / AUX VOLUME TREBLE BASS or for the devices with USB cable: a. Insert one plug of the USB cable (not supplied) to the socket on MCM760 b. Insert the other plug of the USB cable to the USB output terminal of the USB device or for the memory card: a. Insert the memory card into a card reader (not supplied) b. Use a USB cable (not supplied) to connect the card reader to the socket on MCM760 Connecting a non-USB device It is possible to use an additional appliance, e.g. TV,VCR or CD recorder with the set. On MCM760, you can playback music from an external source. 1 Insert the red plug of the red/white audio cables (not supplied) to the red socket AUX/CDR IN R and the white plug to the white socket AUX/ CDR IN L 2 Connect the other end of the audio cables to the AUDIO OUT terminals of the additional appliance 15