Philips MCM760 User manual - Page 17

English Preparation Using the remote control IMPORTANT! - Always point the remote control directly towards IR area. Notes for remote control: - First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). - Then select the desired function (for example ÉÅ, 4 , ¢). Inserting batteries into the remote control 1 Open the battery compartment 2 Insert 2 batteries type R06 or AA into the remote control with the correct polarity as indicated by the "+" and "-" symbols inside the battery compartment 3 Put back the compartment door 3 1 2 Setting the clock After connecting MCM760 to the power supply, set the clock first. 1 On the remote control, press and hold DISPLAY/CLOCK until the clock time starts flashing ➜ The display shows the set time ➜ 12:00 AM appears by default if you have not set the clock 2 Press PROGRAM repeatedly to change between 12-hour and 24-hour clock mode 3 Press à or á repeatedly to set the hour 4 Press ÉÅ to change to minutes setting, then press à or á repeatedly to set the minutes 5 Press DISPLAY/CLOCK again to store the setting. ➜ The clock will start working. Helpful hints: - The clock setting will be erased when the system is disconnected from the power supply. - The set will exit from the clock setting mode if no button is pressed within 90 seconds. STANDBY CAUTION! - Remove batteries if they are exhausted or will not be used for a long time. - Do not use old and new or different types of batteries in combination. - Batteries contain chemical substances, so they should be disposed of properly. CD TUNER TAPE AUX REPEAT PROGRAM SHUFFLE TAPE A /B DISPLAY/CLOCK VOL PRESET TAPE REC ALBUM USB REC USB DEL SNOOZE 17