Philips MZ7C37L User manual - Page 14

English CONTROLS ∞ TIMER - to switch on or off timer. § DISPLAY (not functional for this model) ≥B - to switch the system to standby mode. Notes for remote control: - First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. CD, TUNER, TAPE 1/2 or AUX). - Then select the desired function etc.). 14 OPERATING THE SYSTEM 3 CDC TUNER TAPE CDR/AUX CD CHANGER FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE NEWS DIM T.A. SLEEP INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz VOLUME v PRESET v SEARCH/TUNE A•B PLAY / DIGITAL STEREO HIFI SYSTEM DIGITAL CONTROL DIM PROG/A.REV REC/CD SYN PRESET STOP FLAT BASS INCREDIBLE SURROUND LOUDNESS TREBLE CLOCK/ TIMER DUBBING NORMAL•FAST DOLBY B NR Important: Before you operate the system, complete the preparation procedures. Demonstration mode The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically. Notes: - During the demonstration, if you press any source (or standby-on) button, the system will switch to the respective mode (or standby). - When the system is switched to standby mode, the demonstration will resume five seconds later. To stop the demonstration mode • Press and hold STOP (on the system only) for five seconds when the system is in demonstration mode. ™ The demonstration will stop. ™ "DEMO OFF" is displayed. ™ The system will switch to standby mode. Note: - Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again. To start the demonstration mode • Press and hold STOP (on the system only) for five seconds when the system is in standby mode. ™ The demonstration will begin.