Philips MZ7C37L User manual - Page 19

TUNER English 3 CDC TUNER TAPE CDR/AUX CD CHANGER FRONT BACK REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE NEWS DIM T.A. SLEEP INCREDIBLE SURROUND LOUDNESS FLAT SOUND 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz VOLUME v PRESET v A•B SEARCH/TUNE PLAY / PRESET STOP DIGITAL STEREO HIFI SYSTEM DIGITAL CONTROL DIM PROG/A.REV REC/CD SYN FLAT BASS INCREDIBLE SURROUND LOUDNESS TREBLE CLOCK/ TIMER DUBBING NORMAL•FAST DOLBY B NR Note: - For 'EASY SET' feature, please refer to page 15. Tuning to radio stations 1 Press TUNER to select TUNER mode. ™ "TUNER" will be displayed. A few seconds later, the current radio frequency will be displayed. 2 Press TUNER again to select the desired waveband : FM or AM. 3 Press TUNE S or T (PRESET mode OFF) (or à / á on the remote control) for more than one second, then release. ™ The display will show "SEARCH" until a radio station with sufficient signal strength is found. • Repeat this procedure until the desired station is reached. • To tune to a weak radio station, briefly press TUNE S or T (PRESET mode OFF) repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. Note: - Before activate TUNING function on the system, make sure that the PRESET mode is switched off . Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Manual programming 1 Press TUNER. 2 Press TUNER again to select the desired waveband : FM or AM. 3 Press PROGRAM for less than one second. Automatic programming ™ The PROGRAM flag starts flashing. 1 Press TUNER. ™ The next available preset number will 2 Press PROGRAM for more than one be displayed for selection. second. 4 Press TUNE S or T (PRESET ™ The PROGRAM flag starts flashing and "AUTO" will be displayed. ™ The system will search for every available station in the FM waveband first, then search the AM waveband. ™ All available radio stations will be stored automatically. The frequency and preset number will be displayed briefly. ™ The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. ™ The system will remain tuned to the mode OFF) (or à / á on the remote control) to tune to the desired frequency. • If you wish to store the radio station to another preset number, first select PRESET mode, then press PRESET 4 or 3 to select the desired preset number. ™ The PRESET flag will be displayed. 5 Press PROGRAM again. ™ The PROGRAM flag disappears and the radio station will be stored. • Repeat the steps 3 to 5 to store other preset radio stations. last stored preset radio station. Notes: Notes: - You can cancel the automatic programming by pressing PROGRAM or STOP (on the system only). - If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming: only the preset numbers 10 to 40 will be programmed. - When 40 radio stations are stored and you attempt to store another radio station, the display will show" FULL". If you want to change an existing preset number, repeat steps 3 - 5. - You can cancel manual programming by pressing STOP (on the system only). - During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. 19