Philips NP2500 User manual - Page 13

6 First-time setup This is how to navigate and select with the remote control: • Press or to select a menu option. • Press OK to confirm a selection. • Press BACK to go back to the previous screen. • Press HOME to go to the Home menu. When you connect NP2500 to the power supply for the first time, NP2500 displays the prompt for the language selection. 1 Select the language and confirm. »» NP2500 displays the prompt for the optional demo play. You have two options: • View the demo. • Complete the first-time setup. Tip •• After the first-time set-up, you can change the language in the Settings menu. View the demo 1 Select "[Yes, show me the demo]", to view the demo. »» The demo plays continuously until you exit the demo play. 2 To exit the demo play, press . Note •• NP2500 remains in first-time setup status until you select [No] to decline the demo play. •• You can start the demo play again with the DEMO button on the remote control or in the Settings menu of NP2500. 12 EN First-time connection to home network After you select [No] to decline to view the demo, NP2500 prompts you to select your location / time zone. NP2500 also reminds you to register NP2500 at www.philips.com/ welcome and to install the PC software. This is how to navigate and select with the remote control: • Press or to select a menu option. • Press OK to confirm a selection. • Press BACK to go back to the previous screen. • Press HOME to go to the Home menu. 1 Select the location / time zone and confirm. »» NP2500 shows the prompt for the network connection. 2 Select [Yes], to create a connection to the network. »» NP2500 shows the prompt for the network setup (if no network has been set up yet). »» Select [No] to exit the setup and go to the Home menu. 3 Continue with one of the following options: • First-time setup: Wireless network connection with automatic IP address This setup requires the following: • A wireless access point or wireless router with broadband Internet access • Manual entry of your encryption key (for encrypted network connections only) • First-time setup: Wireless network connection with static IP address This setup requires the following: • A wireless access point or wireless router with broadband Internet access • Manual entry of your IP address.