Philips NP2500 User manual - Page 38

Troubleshooting - transmission

Page 38 highlights

11 Troubleshooting No network connection, what do I do? During network connection setup, the player may have assigned a pre-defined IP address and tries to establish a network connection with this pre-defined IP address. (The player tries to establish a wireless or wired network connection, depending on the type of setup you initially selected.) Possible reasons: - The static IP address failed to register (for example if you press HOME or exit the setup process by other means before you have entered the correct static IP address). - The automatic IP address failed to register automatically through DHCP server (for example if the automatic connection to the DHCP server failed and the player prompts you to enter a static IP address, but you press HOME or exit the setup process by other means before you have entered the correct static IP address). Solution: Follow the instructions in chapter 'Network settings' in this user manual to setup your network correctly. The 'Network settings' allow you to change between wireless and wired network connection. I cannot hear any sound or the sound is poor, what do I do? •• Press + VOL - to increase the volume. •• Press the MUTE button again to reactivate the sound output. Is there a maximum distance of transmission between a wireless router and NP2500 for effective streaming? Yes. The maximum distance of Wi-Fi transmission is 250m measured in open spaces. However, in a home environment, where solid obstacles such as walls and doors are present, the effective transmission distance is reduced to 50-100m. Reposition the devices if you experience transmission problems. I have not received any registration email from [email protected]. •• Check that the email address that is entered in the user registration section is valid and spelled correctly. •• Check that the PC has an active Internet connection. •• The Internet server may be busy, try again later. •• Check if the email was redirected to the spam folder. How do I avoid Wi-Fi interferences from other devices that operate in the same (2.4GHz) frequency spectrum, such as Dect phones or bluetooth devices? •• Move NP2500 at least 3m away from such devices. •• Use a WEP/WPA encryption key when you create the wireless connection your PC / home network. •• Change the operating channel on the interfering devices. •• Turn the devices in different directions to minimize interference. EN 37 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

37
I have not received any registration email from
Check that the email address that is
entered in the user registration section is
valid and spelled correctly.
Check that the PC has an active Internet
connection.
The Internet server may be busy, try
again later.
Check if the email was redirected to the
spam folder.
How do I avoid Wi-Fi interferences from
other devices that operate in the same
(2.4GHz) frequency spectrum, such as Dect
phones or bluetooth devices?
Move NP2500 at least 3m away from
such devices.
Use a WEP/WPA encryption key when
you create the wireless connection your
PC / home network.
Change the operating channel on the
interfering devices.
Turn the devices in different directions to
minimize interference.
11 Troubleshooting
No network connection, what do I do?
During network connection setup, the player
may have assigned a pre-defined IP address
and tries to establish a network connection
with this pre-defined IP address. (The player
tries to establish a wireless or wired network
connection, depending on the type of setup
you initially selected.)
Possible reasons:
- The static IP address failed to register (for
example if you press
HOME
or exit the setup
process by other means before you have
entered the correct static IP address).
- The automatic IP address failed to register
automatically through DHCP server (for
example if the automatic connection to the
DHCP server failed and the player prompts
you to enter a static IP address, but you press
HOME
or exit the setup process by other
means before you have entered the correct
static IP address).
Solution:
Follow the instructions in chapter ‘Network
settings’ in this user manual to setup your
network correctly. The ‘Network settings’
allow you to change between wireless and
wired network connection.
I cannot hear any sound or the sound is poor,
what do I do?
Press
+ VOL -
to increase the volume.
Press the
MUTE
button again to
reactivate the sound output.
Is there a maximum distance of transmission
between a wireless router and NP2500 for
effective streaming?
Yes. The maximum distance of Wi-Fi
transmission is 250m measured in open
spaces. However, in a home environment,
where solid obstacles such as walls and
doors are present, the effective transmission
distance is reduced to 50-100m. Reposition
the devices if you experience transmission
problems.
English
EN