Philips NP2500 User manual - Page 31

onscreen prompts for advanced configurations that are not described in this manual. 1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2500 and the Ethernet jack of the wired router. 2 Ensure that the wired router is turned on and has broadband Internet access. 3 Turn on NP2500. 4 Press SETTINGS, to go to the Settings menu. 5 Select [Wired (Ethernet)] to start the network setup process. »» NP2500 tries to acquire an automatic IP address. »» Press BACK to enter your IP address manually. 6 Enter your static IP address and confirm. »» NP2500 shows the confirmation for the connection to the network. »» NP2500 shows the prompt for the connection to the Internet. 7 Select [Yes] to connect to the Internet. »» NP2500 shows the confirmation for the connection to the Internet. Location and time zone This is how you can change the location and time zone settings of NP2500: 1 Press SETTINGS, to go to the Settings menu. 2 Select [Location and time zone]. 3 Select a menu option and confirm. »» NP2500 applies the new location and time zone settings. »» Press BACK to go back to the previous screen. »» Press HOME to go to the Home menu. 30 EN Language This is how you can change the language of the display: 1 Press SETTINGS, to go to the Settings menu. 2 Select [Language]. 3 Select a menu option and confirm. »» The display language changes to the new setting. »» Press BACK to go back to the previous screen. »» Press HOME to go to the Home menu. Register NP2500 Registration of NP2500 requires a valid email address and mailbox access. This is how to navigate and select with the remote control: • Press or to select a menu option. • Press OK to confirm a selection. • Press BACK to go back to the previous screen. • Press HOME to go to the Home menu. The alphanumeric buttons of the remote control are multi-function buttons: • To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of NP2500. • To cycle through the alphanumeric characters that are available, press a button repeatedly. • To delete the last character entry from the display, press CLEAR. • To delete the whole last line entry from the display, press and hold CLEAR.