Philips PPX5110 User manual - Page 4
General safety information
View all Philips PPX5110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1 General safety information Do not make any changes or settings that are not described in this user manual. Physical injury, damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated. Setting up the device The device is for indoor use only. The device should be placed securely on a stable, flat surface. Position all cables in such a way that no one will trip over them, thus avoiding possible injuries to persons or damage to the device itself. Do not operate the device in damp rooms. Never touch the main cable or the main connection with wet hands. The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes if it is in use. Protect the device from direct sunlight, heat, intense temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data (see Technical data, page 19). When the device is on for a long time, the surface becomes hot and a warning symbol appears. The device switches automatically to stand-by mode when it gets too hot. Do not allow liquids to leak into the device. Turn off the device and disconnect it from the main supply if liquids or foreign substances leak into the device. Have the device inspected by an authorised service centre. Always handle the device with care. Avoid touching the lens. Never place heavy or sharp objects on the device or the power cable. If the projector gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your device checked by an authorised service centre. Keep device away from fire. The battery is integrated with the device. Do not dissemble and modify. The battery should be replaced by qualified service staff only. DANGER! Risk of explosion with incorrect type of batteries! Do not try to replace the battery yourself. Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions: • if the device is moved from a cold to a warm area; • after a cold room is heated; • when this device is placed in a damp room. Proceed as follows to avoid any moisture buildup: 1 Seal this device in a plastic bag before moving it to another room, in order for it to adapt to room conditions. 2 Wait one to two hours before you take the device out of the plastic bag. The device should not be used in a very dusty environment. Dust particles and other foreign objects may damage the device. Do not expose the device to extreme vibrations. It may damage the internal components. Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children. For your own safety, do not use the device during thunderstorms with lightning. Repairs Do not repair the device yourself. Improper maintenance can result in injuries or damage to the device. Your device must be repaired by an authorised service centre. Find details of authorised service centres on the warranty card. Do not remove the type label from your device; this will void the warranty. 4 Philips · PPX5110