Philips S900 User Manual - Page 70
Troubleshooting, The display doesn°t respond or the display - pc tools
![]() |
View all Philips S900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Troubleshooting PC tool cannot be successfully connected If PC tool fails to connect successfully, please check if the Mass storage only feature in Phone Settings menu has been activated. If it has been activated, please deactivate the function and switch off the phone. Thereafter, switch on the phone again to re-connect. The phone does not switch on Remove/reinstall the battery. Then charge the phone until the battery icon stops scrolling. Unplug the charger and try to switch the mobile phone on. The display shows BLOCKED when you switch on Somebody tried to use your phone but didn't know the PIN code nor the unblocking code (PUK). Contact your service provider. The display shows IMSI failure This problem is related to your subscription. Contact your network operator. Your phone doesn't return to the idle screen Long press key or switch off the phone. Check that the SIM card and the battery are installed correctly and switch it on again. 68 The network symbol is not displayed The network connection is lost. Either you are in a radio shadow (in a tunnel or between tall buildings) or you are outside the network coverage area. Try from another place, try to reconnect to the network (especially when abroad), check that the antenna is in place if your mobile has an external antenna, or contact your network operator for assistance/information. The display doesn't respond (or the display responds slowly) to key presses The display responds more slowly at very low temperatures. This is normal and does not affect the operation of your phone. Take the phone to a warmer place and try again. In other cases, please contact your phone supplier. Your battery seems to over heat You might be using a charger that was not intended for use with your phone. Make sure you always use Philips authentic accessory shipped with your phone. Your phone doesn't display the phone numbers of incoming calls This feature is network and subscription dependent. If the network does not send the caller's number, the phone will display Call 1 or Withheld instead. Contact your operator for detailed information on this subject.
![](/manual_guide/products/phillips-s900-user-manual-13d934f/70.png)