Philips SM7684 User manual - Page 23

Problem, Cause, Solution

Page 23 highlights

English 23 Problem Cause Solution The machine is in DEMO mode. You pressed the standby button for more than 8 seconds. Switch the machine off and then on again with the main switch on the back of the machine. The 'coffee grounds container full' icon remains displayed. You emptied the coffee grounds container while the machine was switched off. Always empty the coffee grounds container while the machine is switched on. If you empty the coffee grounds container when the machine is switched off, the coffee cycle counter is not reset. You placed back the coffee grounds container too fast. Do not place back the coffee grounds container until the screen prompts you to put it back. The 'coffee grounds container full' icon is displayed even though the container is not full. The machine did not reset the counter the last time you emptied the coffee grounds container. Always wait approx. 5 seconds when you place back the coffee grounds container. In this way the coffee grounds counter will be reset to zero. Always empty the coffee grounds container while the machine is switched on. If you empty the coffee grounds container when the machine is switched off, the coffee grounds counter will not be reset. I cannot remove the brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds container. Then close the service door and switch the machine off and back on again. Try again to remove the brew group. You have not removed the coffee grounds container. Remove the coffee grounds container before you remove the brew group. I cannot insert the brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds container. Leave the brew group out. Close the service door and switch the machine on and off. Then put the brew group in the correct position and reinsert it into in the machine (see 'Reinserting the brew group'). The coffee is watery. The brew group is dirty or needs to be lubricated. Clean and lubricate the brew group.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Problem
Cause
Solution
The machine is in
DEMO mode.
You pressed the standby
button for more than 8
seconds.
Switch the machine off and then on
again with the main switch on the
back of the machine.
The 'coffee grounds
container full' icon
remains displayed.
You emptied the coffee
grounds container while the
machine was switched off.
Always empty the coffee grounds
container while the machine is
switched on. If you empty the coffee
grounds container when the
machine is switched off, the coffee
cycle counter is not reset.
You placed back the coffee
grounds container too fast.
Do not place back the coffee
grounds container until the screen
prompts you to put it back.
The 'coffee grounds
container full' icon is
displayed even though
the container is not
full.
The machine did not reset
the counter the last time you
emptied the coffee grounds
container.
Always wait approx. 5 seconds when
you place back the coffee grounds
container. In this way the coffee
grounds counter will be reset to zero.
Always empty the coffee grounds
container while the machine is
switched on. If you empty the coffee
grounds container when the
machine is switched off, the coffee
grounds counter will not be reset.
I cannot remove the
brew group.
The brew group is not in the
correct position.
Reset the machine in the following
way: place back the drip tray and the
coffee grounds container. Then close
the service door and switch the
machine off and back on again. Try
again to remove the brew group.
You have not removed the
coffee grounds container.
Remove the coffee grounds
container before you remove the
brew group.
I cannot insert the
brew group.
The brew group is not in the
correct position.
Reset the machine in the following
way: place back the drip tray and the
coffee grounds container. Leave the
brew group out. Close the service
door and switch the machine on and
off. Then put the brew group in the
correct position and reinsert it into in
the machine (see 'Reinserting the
brew group').
The coffee is watery.
The brew group is dirty or
needs to be lubricated.
Clean and lubricate the brew group.
23
English