Philips SRM7500 User manual - Page 5
Configuring the Remote Control
UPC - 609585113541
View all Philips SRM7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SRM7500 - Instructions for Use 5 Press the cover inwards and lift it up. Place the 3 batteries into the battery compartment. Position the cover and press firmly until you hear a click. The remote initializes and is now ready to be configured as described below. Note Leave your PC turned on during the configuration of the remote control. You still need to set up the connection between the remote and the PC. Configuring the Remote Control A wizard on the remote's screen will guide you through the different steps of the initial configuration of your SRM7500. 1 Select the language for your instructions on the remote using the cursor keys and press . 2 Select Next and press . Make sure the remote is within a range of 6 feet (2 meters) of the PC. When the connection between the remote and the PC is installed successfully, a confirmation message appears on the SRM7500 screen and the MediaControl icon in the taskbar on your PC screen turns green: . The name of the PC you want to control with your SRM7500 appears. 3 Confirm that you want to add other devices, like your TV or DVD player, by selecting Yes and press . In doing so, you replace their original remote control with SRM7500. The installation of 4 devices typically takes up to 20 minutes. 4 Select the device and brand of the device you want to add using the cursor keys and press . The remote searches the database for available code sets. © 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium) SRM7500 - Instructions for Use