Pioneer A-35R Owner's Manual - Page 13

English SPECIFICATIONS Amplifier Section Continuous rated power output of 60 watts* per channel, min., at 4 ohms, from 20 Hz to 20,000 Hz with no more than 0.3 %** total harmonic distortion. Input sensitivity/impedance PHONO (MM 2.8 mV/50 kΩ CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR 200 mV/50 kΩ PHONO (MM) overload level 1 kHz, T.H.D. 0.1 150 mV Output level/impedance TAPE1 REC, TAPE2 MONITOR REC ......... 200 mV/1 kΩ Frequency response PHONO (MM 20 Hz to 20 kHz, ±0.5 dB CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR 5 Hz to 100 kHz, +0 -3 dB*** Tone control BASS 8 dB (100 Hz) TREBLE 8 dB (10 kHz) Loudness contour (volume control set at -30 dB position) 6 dB (100 Hz)/+4 dB (10 kHz) Signal-to-Noise ratio (IHF short circuit, A network) PHONO (MM, 5 mV input 85 dB*** CD, TUNER, LINE/SB, TAPE1/CD-R/MD, TAPE2 MONITOR 106 dB*** Power Supply/Miscellaneous Power requirements AC 120 V, 60 Hz Power consumption 145 W Dimensions (including knobs and other protruding parts) 420 (W) x 114 (H) x 307 (D) mm Weight (without package 5.9 kg Accessories Remote control unit 1 Batteries (AA/R6P 2 Power cord (Rated current 7 A 1 Operating instructions 1 Warranty card 1 NOTE: Specifications and design are subject to possible modifications without notice, due to improvements. * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers. ** Measured by Audio Spectrum Analyzer. *** Measured with DIRECT button set to on. Published by Pioneer Corporation. Copyright © 2000 Pioneer Corporation. All rights reserved. 13 En