Pioneer A-35R Owner's Manual - Page 7
Panel Facilities - remote
View all Pioneer A-35R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English PANEL FACILITIES [ FRONT PANEL ] 12 3 4 5 POWER z¿≤.B STEREO AMPLIFIER Î - OFF _ ON A SPEAKERS B BASS REFERENCE STEREO AMPLIFIER TREBLE PHONES - + SB MODE - + VOLUME MIN MAX CD TUNER PHONO LINE TAPE 1/ SB CD-R/MD TAPE 2 MONITOR BALANCE INPUT SELECTOR DIRECT L R TAPE 2 MONITOR Direct Energy MOS ~=-0 98 76 1 POWER (- OFF/_ ON) switch Press to turn power to the unit ON and OFF. This unit cannot be turned ON and OFF using the remote control unit. 2 REMOTE CONTROL SENSOR window 3 VOLUME control Use to adjust the volume level. 4 INPUT SELECTOR knob/indicators Turn the knob clockwise or counterclockwise so that the indicator lights for your desired input source. Turning the knob clockwise causes the lit indicator to right. Turning counter- clockwise causes it to left. CD : For compact disc playback with a CD player. TUNER : For AM or FM broadcast reception with a tuner. PHONO : For record playback with a turntable. LINE/SB : Set to this position when listening to the program from a component connected to the LINE/SURROUND BACK terminals. TAPE 1/ : For playback with a cassette deck, CD CD-R/MD recorder or MD recorder connected to TAPE1/ CD-R/MD terminals. 5 TAPE 2 MONITOR button/indicator Use when there is an adaptor component (graphic equalizer, etc.) or cassette deck connected to the TAPE2 MONITOR terminals. On : Indicator lights when using the adaptor component or listening to the cassette deck. Off : Indicator goes off when not in use. NOTES: ÷ When no connections are made to the TAPE2 MONITOR terminals, or when they are not in use, be sure to set this switch to the off position. (No sound will be heard if it is set to the on position.) ÷ When the TAPE2 MONITOR indicator is on and the INPUT SELECTOR knob is not set to TAPE1/CD-R/MD, the signals which are input through TAPE 2 MONITOR are then output at TAPE1/CD-R/MD REC OUT. 6 BALANCE control Should normally be left in the center position. Adjust balance if the sound is louder from one of the speakers. If the right side is louder, turn toward the L (left) position and if the left side is louder, turn toward the R (right) position. NOTE: This control does not operate when the DIRECT button is in the on position. 7 En