Pioneer AIRWARE User Guide - Page 21

If this happens: You should: There is no power, or your AirWare shuts off quickly. Insert your AirWare into its home docking station and plug the AC adaptor into the wall to charge the battery. Your AirWare's battery is low (see page 14). You do not receive all XM channels you have subscribed to. Contact XM Satellite Radio Your AirWare may not be activated (see page 16). Audio sounds distorted when using the built-in FM transmitter. Reduce audio output level (see page 22). Audio is too soft when using Increase audio output level the built-in FM transmitter. (see page 22). No audio when using the home docking station that is connected to a stereo system. Check to see if you have plugged the AC adaptor into the home docking station. The audio line output only works when the AC adaptor is plugged in. You cannot tune to a channel. Check that you have not chosen to skip that channel (see page 28). If the problem persists, contact XM Satellite Radio at 1.800.967.2346. Verify that you are authorized to receive that channel as part of your XM subscription, and that you have not asked XM Satellite Radio to block that channel. No song title or artist name displayed. Nothing is wrong with your AirWare. That information may be in the process of being updated. On some sports and news channels, there is no title or artist information. No audio when listening through an FM radio. Make sure that the FM radio and your AirWare are set to the same frequency (see page 25). Audio has static while listening through an FM radio. Change to another FM frequency (see page 25). If the problem persists and you are using the wireless FM transmitter in a vehicle, change to a hard-wired FM transmitter (see page 31). Audio on XM Instant Traffic and Weather channels sounds different from other XM channels. Nothing is wrong with your AirWare. These channels use a different audio technology than the other XM channels. 40 If this happens: You should: Your AirWare's controls do not respond. Check whether the lock indicator is being displayed. If so, unlock the controls by pressing and holding the "mute/pause/lock" button until the lock indicator disappears (see page 35). If you have unlocked the controls and they still do not respond, reset your AirWare by carefully inserting the tip of a paper clip into the "RESET" hole under the battery cover. You can also reset your AirWare by removing and reinserting the battery. The display does not change or the backlight does not turn on or turn off. Reset your AirWare by following the procedure above. Battery level meter doesn't match the charging or expected playback time. Fully charge the battery, then use your AirWare until the battery is fully exhausted. This calibrates the battery level meter. 41