Pioneer AIRWARE User Guide - Page 9

Activating Your AirWare Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your AirWare's package and under the battery.) Write the ID here: The XM Radio ID does not use the letters I, O, S, and F. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the XM Radio ID and a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods, you may need to keep your AirWare on for longer to complete the activation process. When you can access the full channel lineup on your AirWare, you're done! Go Ahead! Rotate the dial to preview a list of channels. When you find one you're interested in, press the dial in to tune to that channel. Listening To XM Changing channels 1. Rotate the side dial to preview a list of channels. 2. When your desired channel is highlighted, press the dial in to select that channel. -OR1. Press the "pre/dir" button until the word "DIRECT" flashes in the display. 2. Press the number keys corresponding to a channel number. For channel 8, press "8." For channel 130, press "1," then "3," then "0." -OR1. Press the " " or " " buttons while in "LIVE" mode. You will see the channels organized by category. 2. Rotate the dial to highlight a channel. Press the dial in to select that channel. 2 1 PI Radio Artwork Note: Keypad Artwork for laser etching of painted surfaces Note: Faceplate Artwork IMD parts Note: Power and scroll wheel for screen printing - COLOR TBD Note: Phone and RF icon are be to molded in to the receiver 16 17 02.16.04